Pavers

Optiloc

optiloc-paver-rustic-red-bowmanville-v3-1920x1080
optiloc-standard-unit-960x860
optiloc-paver-rustic-red-bowmanville-v3-1920x1080
optiloc-standard-unit-960x860
Unilock

OPTILOC

Optiloc is a high performance, heavy duty industrial paver that is one of the best solutions for vehicular pavements. Possessing the same L-shaped, tri-axis locking principle as world renowned Anchorlock, Optiloc offers a sleeker, rectilinear look, which can also be laid mechanically. For large scale commercial projects, special order colors and textures are available.

Applications
  • COMMERCIAL VEHICULAR
  • PEDESTRIAN
  • RESIDENTIAL VEHICULAR
TECHNOLOGY
CLASSIC
COLOR
NATURAL
SHAPE & SIZE
STANDARD
Full Detail

Optiloc™

Optiloc is one of the best pavers to use for roads, commercial parking lots and loading ramps. The dual-axis properties of this shape make it an extremely strong surface designed for prolonged heavy vehicular use.

RECOMMENDED BASE STABILIZATION – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base. (This is a standard is typical, but most commercial applications will have site specific engineering provided by an engineer.)

STANDARD BASE – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

STANDARD BEDDING COURSE – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

ALTERNATIVE PERMEABLE BASE – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.) (This is a standard is typical, but most commercial applications will have site specific engineering provided by an engineer.)

ALTERNATIVE PERMEABLE BEDDING COURSE –1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

JOINTING MATERIAL AND JOINT STABILIZATION 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand) Type is generally specified by the site engineer.

HANDLING – This product has no special handling requirements.

EDGE RESTRAINT - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

PAVER COMPACTION - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

CLEANERS – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 SEALERS 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

GET A QUOTE ON THIS PRODUCT

This fine quality product offers beauty, durability, and versatility to enhance your landscape and outdoor living space. Tell us about your project and we’ll be happy to give you a quote so you can discover how affordable this is to install for your home or business