Brussels Fullnose
Brussels Fullnose brings the relaxed appearance and timeless warmth of Brussels Block to a fullnose coping. Pair it with Brussels Block pavers or Brussels Dimensional, or virtually any of the many Unilock pavers and walls that offer an antiqued finish, as a comfortable rounded edge to pools, steps, walls, firepits and other vertical features. Available in a wide range of colors.
CLASSIC
STANDARD
150mm x 300mm x 70mm
5 7/8″ x 11 7/8″ x 2 3/4″
HANDLING AND INSTALLATION - Care must be taken to avoid tossing stones so that they bang against each other. Damage to the surface appearance can happen if handled too rough.
ADHESIVES – Any concrete adhesive from your hardscape or building supplier. Units can be mortared in, but concrete adhesives are always stronger.
JOINT COMPOUNDS – Use any quality exterior latex joint caulking. Be sure to space units apart ¼”. For mortar joints, space units apart approximately 3/8” to ½”.
CLEANERS – Use any concrete cleaner approved for use on paving stone. Follow manufacturer’s dilution rates and application procedures. Always test in a small area to ensure desired results before cleaning entire area.
SEALERS
Product may be sealed but it is not absolutely required
Use any concrete cleaner approved for use on paving stone. Select type for desired sheen. To minimize the possibility of slipping, avoid high gloss for steps and pool coping
NOTE: Always clean surface with a paver cleaner prior to sealing.
Additional information
| Color | Limestone, Midnight Charcoal, Sandstone |
|---|
Reviews
There are no reviews yet.