Pavers

Arcana

Offer Image
arcana-610x610x50-corvara-960x860-002
arcana-610x610x50-lugano-960x860
arcana-610x610x50-modena-960x860
arcana-610x610x50-vivanto-960x860
Offer Image
arcana-610x610x50-corvara-960x860-002
arcana-610x610x50-lugano-960x860
arcana-610x610x50-modena-960x860
arcana-610x610x50-vivanto-960x860
Unilock
The silky, matte texture and unique speckled color palette of Arcana is created by fine blasting its surface to expose a combination of natural granite, quartz and marble particles. These large format slabs are on-trend for patios, pool surrounds, walkways, roof decks and overlay projects. Arcana features a non-slip surface and is factory sealed with EasyClean™, an integral surface protection from stains. This is a significant benefit when Arcana is used in outdoor dining areas and high traffic commercial projects.
Applications
  • PEDESTRIAN
TECHNOLOGY
EASYCLEAN™
Nothing protects pavers from stains like EasyClean.
  • Pavers are pre-sealed at the factory
  • Enhanced resistance to weathering
  • Reduced dirt absorption
  • Stains from leaves, coffee, ketchup, mustard, wine and BBQ oils are easier to remove
ENDURACOLOR
  • Two-step manufacturing process: Coarser base aggregates combined with color and wear-resistant surface aggregates
  • Unaffected by frost, resistant to de-icing salts, slip resistant and chlorine pool water resistant
COLOR
CORVARA
CORVARA
CORVARA
LUGANO
LUGANO
MODENA
MODENA
VIVANTO
VIVANTO
SHAPE & SIZE
SPECIAL ORDER
SPECIAL ORDER
24"X24" 606mm x 606mm x 50mm
23 7/8" x 23 7/8" x 2"
Full Detail

RECOMMENDED BASE STABILIZATION – one layer of DriveGrid™" stabilization grid (or as specified by engineer) between subgrade and base material. Use under Standard Base Gravel or Permeable Base Gravel. Recommended depth 8” to 10” below pavers for maximum stability and performance OR as specified by project engineer.

STANDARD BASE – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

STANDARD BEDDING COURSE – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

ALTERNATIVE PERMEABLE BASE – Min. 6” – 8” of ¾“ clear (ASTM No. 57) open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

ALTERNATIVE PERMEABLE BEDDING COURSE – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8 or 9) screeded over base.

JOINTING MATERIALS

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements. Only use polymeric if specified by project engineer.

HANDLING – This product has zero bevel edges so handle carefully to prevent edge chipping.

EDGE RESTRAINT - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

PAVER COMPACTION - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction. No compaction is required if installed on roof deck pedestals.

CLEANERS – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

SEALERS

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

GET A QUOTE ON THIS PRODUCT

This fine quality product offers beauty, durability, and versatility to enhance your landscape and outdoor living space. Tell us about your project and we’ll be happy to give you a quote so you can discover how affordable this is to install for your home or business